diff --git a/README.md b/README.md
index 9dfcdd8..2876078 100644
--- a/README.md
+++ b/README.md
@@ -88,8 +88,8 @@ stream with two producers:
 
 ```yaml
 xmeye_<entry_id>_ch<N>_camera:
-  - rtsp://<dvr>:554/user=…&password=…&channel=N&stream=0.sdp   # H.265, passthrough
-  - ffmpeg:xmeye_<entry_id>_ch<N>_camera#video=h264#audio=opus   # H.264, on demand
+  - rtsp://<dvr>:554/user=…&password=…&channel=N&stream=0.sdp                # H.265, passthrough
+  - ffmpeg:xmeye_<entry_id>_ch<N>_camera#video=h264#audio=opus#bitrate=2048k  # H.264, on demand
 ```
 
 go2rtc walks the producers in order and only dials the second one when the first one's
@@ -103,6 +103,22 @@ audio-only variant — its provider skips the rewrite when the stream already ex
 of its producers matches the camera's stream source. The registration is re-asserted on
 every `stream_source()` call, so it self-heals.
 
+### Options
+
+Both settings live in the integration's options (⚙️ on the device page) and apply per
+device. Changing either reloads the entry and re-registers the streams.
+
+- **Transcode H.265 to H.264** (default on). Turn it off and the integration registers
+  nothing with go2rtc, leaving H.265 handling to Home Assistant's defaults — live view then
+  only works in clients that decode HEVC. The repair notices disappear too, since the
+  trade-off was made deliberately.
+- **H.264 transcode bitrate cap** (default 2048 kbit/s). go2rtc's built-in h264 template
+  carries no rate control, so x264 falls back to CRF 23 and spends bits preserving the
+  compression artefacts the DVR already introduced. On a 2560×1440 main stream that
+  measured **6.6 Mbit/s out of a 0.73 Mbit/s H.265 source** — nine times the input. The cap
+  becomes `-b:v/-maxrate/-bufsize` on the encoder. Raise it if the picture looks soft on
+  busy scenes; it only affects the transcoded path, never what HEVC-capable clients receive.
+
 Notes:
 
 - **Any go2rtc works.** The integration reuses the connection the `go2rtc` integration
diff --git a/custom_components/xmeye/camera.py b/custom_components/xmeye/camera.py
index efc5f17..4d2a5f5 100644
--- a/custom_components/xmeye/camera.py
+++ b/custom_components/xmeye/camera.py
@@ -31,6 +31,10 @@
     CODEC_H264,
     CODEC_H265,
     CODEC_UNKNOWN,
+    CONF_TRANSCODE_BITRATE,
+    CONF_TRANSCODE_H265,
+    DEFAULT_TRANSCODE_BITRATE,
+    DEFAULT_TRANSCODE_H265,
     DOMAIN,
     REPAIR_H265_NO_GO2RTC,
     REPAIR_H265_TRANSCODING,
@@ -446,10 +450,22 @@ async def _maybe_register_go2rtc(self) -> None:
         """Arm go2rtc transcoding if the chosen stream turned out to be H.265."""
         if self._stream_url is None or self._codec != CODEC_H265:
             return
+        options = self._coordinator.entry.options
+        if not options.get(CONF_TRANSCODE_H265, DEFAULT_TRANSCODE_H265):
+            _LOGGER.info(
+                "ch%d is H.265 but transcoding is disabled for this device — "
+                "leaving the stream to Home Assistant's defaults",
+                self._channel + 1,
+            )
+            # Registers nothing; called only so any advisory left over from
+            # before it was switched off gets cleared.
+            await self._ensure_go2rtc_stream(self._stream_url)
+            return
         _LOGGER.info(
             "ch%d is H.265 — registering with go2rtc (H.265 passthrough + "
-            "on-demand H.264 transcode)",
+            "on-demand H.264 transcode capped at %d kbit/s)",
             self._channel + 1,
+            int(options.get(CONF_TRANSCODE_BITRATE, DEFAULT_TRANSCODE_BITRATE)),
         )
         if not await self._ensure_go2rtc_stream(self._stream_url):
             _LOGGER.debug(
@@ -467,7 +483,7 @@ async def _ensure_go2rtc_stream(self, url: str) -> bool:
 
         1. the DVR's RTSP URL — H.265 handed through untouched to clients
            that can decode it (VLC, the mobile apps, Safari);
-        2. ``ffmpeg:<identifier>#video=h264#audio=opus`` — go2rtc's
+        2. ``ffmpeg:<identifier>#video=h264#audio=opus#bitrate=…`` — go2rtc's
            ``AddConsumer`` walks producers in order and only dials this one
            when the previous producer's codecs do not match the consumer, so
            the transcode costs nothing until a browser without HEVC asks.
@@ -478,10 +494,27 @@ async def _ensure_go2rtc_stream(self, url: str) -> bool:
         see ``homeassistant/components/go2rtc/__init__.py``:
         ``_update_stream_source`` skips the rewrite when the stream exists
         and one of its producers matches ``await camera.stream_source()``.
+
+        Returns False without touching go2rtc when the user has turned
+        transcoding off for this device.
         """
+        options = self._coordinator.entry.options
+        if not options.get(CONF_TRANSCODE_H265, DEFAULT_TRANSCODE_H265):
+            # Deliberate choice by the user: register nothing and let HA
+            # handle the H.265 stream its own way. Dropping the channel also
+            # clears both advisories — nobody should be nagged about a
+            # trade-off they made on purpose.
+            if self._coordinator.h265_channels.pop(self._channel, None) is not None:
+                _refresh_h265_issues(self.hass, self._coordinator)
+            return False
+
         client: Go2RTCClient | None = self._coordinator.go2rtc_client
         identifier = _go2rtc_identifier(self)
-        sources = [url, f"ffmpeg:{identifier}#video=h264#audio=opus"]
+        bitrate = int(options.get(CONF_TRANSCODE_BITRATE, DEFAULT_TRANSCODE_BITRATE))
+        sources = [
+            url,
+            f"ffmpeg:{identifier}#video=h264#audio=opus#bitrate={bitrate}k",
+        ]
         ok = False
         if client is not None:
             try:
diff --git a/custom_components/xmeye/config_flow.py b/custom_components/xmeye/config_flow.py
index b72fe50..7f307e9 100644
--- a/custom_components/xmeye/config_flow.py
+++ b/custom_components/xmeye/config_flow.py
@@ -33,14 +33,20 @@
     CONF_DEVICE_TYPE,
     CONF_MOTION_CLEAR_DELAY,
     CONF_STORAGE_REFRESH_INTERVAL,
+    CONF_TRANSCODE_BITRATE,
+    CONF_TRANSCODE_H265,
     CONFIG_ENTRY_VERSION,
     DEFAULT_MOTION_CLEAR_DELAY,
     DEFAULT_PORT,
     DEFAULT_STORAGE_REFRESH_INTERVAL,
+    DEFAULT_TRANSCODE_BITRATE,
+    DEFAULT_TRANSCODE_H265,
     DEFAULT_USERNAME,
     DOMAIN,
     MAX_STORAGE_REFRESH_INTERVAL,
+    MAX_TRANSCODE_BITRATE,
     MIN_STORAGE_REFRESH_INTERVAL,
+    MIN_TRANSCODE_BITRATE,
     UDP_DISCOVERY_PORT,
 )
 
@@ -366,6 +372,8 @@ async def async_step_init(
                     CONF_STORAGE_REFRESH_INTERVAL: int(
                         user_input[CONF_STORAGE_REFRESH_INTERVAL]
                     ),
+                    CONF_TRANSCODE_H265: bool(user_input[CONF_TRANSCODE_H265]),
+                    CONF_TRANSCODE_BITRATE: int(user_input[CONF_TRANSCODE_BITRATE]),
                 },
             )
 
@@ -376,6 +384,12 @@ async def async_step_init(
         current_interval = int(
             options.get(CONF_STORAGE_REFRESH_INTERVAL, DEFAULT_STORAGE_REFRESH_INTERVAL)
         )
+        current_transcode = bool(
+            options.get(CONF_TRANSCODE_H265, DEFAULT_TRANSCODE_H265)
+        )
+        current_bitrate = int(
+            options.get(CONF_TRANSCODE_BITRATE, DEFAULT_TRANSCODE_BITRATE)
+        )
         return self.async_show_form(
             step_id="init",
             data_schema=vol.Schema({
@@ -399,5 +413,19 @@ async def async_step_init(
                         mode=NumberSelectorMode.SLIDER,
                     )
                 ),
+                vol.Optional(
+                    CONF_TRANSCODE_H265, default=current_transcode
+                ): bool,
+                vol.Optional(
+                    CONF_TRANSCODE_BITRATE, default=current_bitrate
+                ): NumberSelector(
+                    NumberSelectorConfig(
+                        min=MIN_TRANSCODE_BITRATE,
+                        max=MAX_TRANSCODE_BITRATE,
+                        step=256,
+                        unit_of_measurement="kbit/s",
+                        mode=NumberSelectorMode.SLIDER,
+                    )
+                ),
             }),
         )
diff --git a/custom_components/xmeye/const.py b/custom_components/xmeye/const.py
index f7d4f47..d7d5c73 100644
--- a/custom_components/xmeye/const.py
+++ b/custom_components/xmeye/const.py
@@ -10,12 +10,26 @@
 CONF_DEVICE_TYPE = "device_type"
 CONF_MOTION_CLEAR_DELAY = "motion_clear_delay"
 CONF_STORAGE_REFRESH_INTERVAL = "storage_refresh_interval"
+CONF_TRANSCODE_H265 = "transcode_h265"
+CONF_TRANSCODE_BITRATE = "transcode_bitrate"
 
 DEFAULT_MOTION_CLEAR_DELAY = 30  # seconds; 0 = disable debounce
 DEFAULT_STORAGE_REFRESH_INTERVAL = 300  # seconds (5 min)
 MIN_STORAGE_REFRESH_INTERVAL = 60  # 1 min
 MAX_STORAGE_REFRESH_INTERVAL = 3600  # 1 hour
 
+# Whether to hand H.265 channels to go2rtc for on-demand H.264 transcoding.
+DEFAULT_TRANSCODE_H265 = True
+
+# Bitrate cap for that transcode, in kbit/s. go2rtc's built-in h264 template
+# carries no rate control at all, so x264 falls back to CRF 23 and spends bits
+# preserving the compression artefacts the DVR already introduced — a 2K main
+# stream measured 6.6 Mbit/s out of a 0.73 Mbit/s H.265 source. `#bitrate=` is
+# applied after the codec args, so it overrides that.
+DEFAULT_TRANSCODE_BITRATE = 2048
+MIN_TRANSCODE_BITRATE = 256
+MAX_TRANSCODE_BITRATE = 8192
+
 # DVRIP message IDs
 MSG_LOGIN = 1000
 MSG_LOGIN_RSP = 1001
diff --git a/custom_components/xmeye/manifest.json b/custom_components/xmeye/manifest.json
index 6a59e52..ee49081 100644
--- a/custom_components/xmeye/manifest.json
+++ b/custom_components/xmeye/manifest.json
@@ -11,5 +11,5 @@
   "issue_tracker": "https://github.com/equake/hass-xmeye/issues",
   "quality_scale": "silver",
   "requirements": [],
-  "version": "0.8.1"
+  "version": "0.8.2"
 }
diff --git a/custom_components/xmeye/strings.json b/custom_components/xmeye/strings.json
index eec5576..9ba7dfa 100644
--- a/custom_components/xmeye/strings.json
+++ b/custom_components/xmeye/strings.json
@@ -58,7 +58,9 @@
         "description": "Adjust behaviour for this device.",
         "data": {
           "motion_clear_delay": "Motion clear delay (0 = immediate)",
-          "storage_refresh_interval": "Storage (HDD) refresh interval"
+          "storage_refresh_interval": "Storage (HDD) refresh interval",
+          "transcode_h265": "Transcode H.265 to H.264 for browsers without HEVC",
+          "transcode_bitrate": "H.264 transcode bitrate cap"
         }
       }
     }
diff --git a/custom_components/xmeye/translations/de.json b/custom_components/xmeye/translations/de.json
index 2836397..bfa13b7 100644
--- a/custom_components/xmeye/translations/de.json
+++ b/custom_components/xmeye/translations/de.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Verzögerung bis Bewegungsmeldung endet (0 = sofort)",
-          "storage_refresh_interval": "Aktualisierungsintervall für Speicher (HDD)"
+          "storage_refresh_interval": "Aktualisierungsintervall für Speicher (HDD)",
+          "transcode_bitrate": "Bitratenlimit der H.264-Transkodierung",
+          "transcode_h265": "H.265 für Browser ohne HEVC nach H.264 transkodieren"
         },
         "description": "Verhalten dieses Geräts anpassen.",
         "title": "XMEye / Sofia Optionen"
diff --git a/custom_components/xmeye/translations/en.json b/custom_components/xmeye/translations/en.json
index 5ffc31e..b861fd3 100644
--- a/custom_components/xmeye/translations/en.json
+++ b/custom_components/xmeye/translations/en.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Motion clear delay (0 = immediate)",
-          "storage_refresh_interval": "Storage (HDD) refresh interval"
+          "storage_refresh_interval": "Storage (HDD) refresh interval",
+          "transcode_bitrate": "H.264 transcode bitrate cap",
+          "transcode_h265": "Transcode H.265 to H.264 for browsers without HEVC"
         },
         "description": "Adjust behaviour for this device.",
         "title": "XMEye / Sofia Options"
diff --git a/custom_components/xmeye/translations/es.json b/custom_components/xmeye/translations/es.json
index 818848e..2326d9b 100644
--- a/custom_components/xmeye/translations/es.json
+++ b/custom_components/xmeye/translations/es.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Retraso al limpiar detección de movimiento (0 = inmediato)",
-          "storage_refresh_interval": "Intervalo de actualización del almacenamiento (HDD)"
+          "storage_refresh_interval": "Intervalo de actualización del almacenamiento (HDD)",
+          "transcode_bitrate": "Límite de bitrate de la transcodificación H.264",
+          "transcode_h265": "Transcodificar H.265 a H.264 para navegadores sin HEVC"
         },
         "description": "Ajuste el comportamiento de este dispositivo.",
         "title": "Opciones de XMEye / Sofia"
diff --git a/custom_components/xmeye/translations/fr.json b/custom_components/xmeye/translations/fr.json
index c83150f..4ca2ae6 100644
--- a/custom_components/xmeye/translations/fr.json
+++ b/custom_components/xmeye/translations/fr.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Délai avant fin de la détection de mouvement (0 = immédiat)",
-          "storage_refresh_interval": "Intervalle de rafraîchissement du stockage (HDD)"
+          "storage_refresh_interval": "Intervalle de rafraîchissement du stockage (HDD)",
+          "transcode_bitrate": "Plafond de débit du transcodage H.264",
+          "transcode_h265": "Transcoder le H.265 en H.264 pour les navigateurs sans HEVC"
         },
         "description": "Ajustez le comportement de cet appareil.",
         "title": "Options XMEye / Sofia"
diff --git a/custom_components/xmeye/translations/it.json b/custom_components/xmeye/translations/it.json
index 9f00fac..36923ac 100644
--- a/custom_components/xmeye/translations/it.json
+++ b/custom_components/xmeye/translations/it.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Ritardo di chiusura rilevamento movimento (0 = immediato)",
-          "storage_refresh_interval": "Intervallo di aggiornamento archiviazione (HDD)"
+          "storage_refresh_interval": "Intervallo di aggiornamento archiviazione (HDD)",
+          "transcode_bitrate": "Limite di bitrate della transcodifica H.264",
+          "transcode_h265": "Transcodifica H.265 in H.264 per i browser senza HEVC"
         },
         "description": "Regolare il comportamento di questo dispositivo.",
         "title": "Opzioni XMEye / Sofia"
diff --git a/custom_components/xmeye/translations/ja.json b/custom_components/xmeye/translations/ja.json
index b2090d5..2c8979d 100644
--- a/custom_components/xmeye/translations/ja.json
+++ b/custom_components/xmeye/translations/ja.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "モーション検知解除の遅延 (0 = 即時)",
-          "storage_refresh_interval": "ストレージ(HDD)更新間隔"
+          "storage_refresh_interval": "ストレージ(HDD)更新間隔",
+          "transcode_bitrate": "H.264 トランスコードのビットレート上限",
+          "transcode_h265": "HEVC 非対応ブラウザー向けに H.265 を H.264 へトランスコード"
         },
         "description": "このデバイスの動作を調整します。",
         "title": "XMEye / Sofia オプション"
diff --git a/custom_components/xmeye/translations/nl.json b/custom_components/xmeye/translations/nl.json
index b0e389b..0b1c1f4 100644
--- a/custom_components/xmeye/translations/nl.json
+++ b/custom_components/xmeye/translations/nl.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Vertraging bewegingsdetectie wissen (0 = onmiddellijk)",
-          "storage_refresh_interval": "Verversingsinterval opslag (HDD)"
+          "storage_refresh_interval": "Verversingsinterval opslag (HDD)",
+          "transcode_bitrate": "Bitratelimiet van de H.264-transcodering",
+          "transcode_h265": "H.265 naar H.264 transcoderen voor browsers zonder HEVC"
         },
         "description": "Pas het gedrag van dit apparaat aan.",
         "title": "XMEye / Sofia opties"
diff --git a/custom_components/xmeye/translations/pl.json b/custom_components/xmeye/translations/pl.json
index 114b3dc..cfce11a 100644
--- a/custom_components/xmeye/translations/pl.json
+++ b/custom_components/xmeye/translations/pl.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Opóźnienie czyszczenia wykrycia ruchu (0 = natychmiast)",
-          "storage_refresh_interval": "Interwał odświeżania pamięci masowej (HDD)"
+          "storage_refresh_interval": "Interwał odświeżania pamięci masowej (HDD)",
+          "transcode_bitrate": "Limit bitrate'u transkodowania H.264",
+          "transcode_h265": "Transkoduj H.265 na H.264 dla przeglądarek bez HEVC"
         },
         "description": "Dostosuj zachowanie tego urządzenia.",
         "title": "Opcje XMEye / Sofia"
diff --git a/custom_components/xmeye/translations/pt.json b/custom_components/xmeye/translations/pt.json
index dc5f307..2f6a8b9 100644
--- a/custom_components/xmeye/translations/pt.json
+++ b/custom_components/xmeye/translations/pt.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Delay para limpar movimento (0 = imediato)",
-          "storage_refresh_interval": "Intervalo de atualização do storage (HDD)"
+          "storage_refresh_interval": "Intervalo de atualização do storage (HDD)",
+          "transcode_bitrate": "Teto de bitrate do transcode H.264",
+          "transcode_h265": "Transcodificar H.265 para H.264 em navegadores sem HEVC"
         },
         "description": "Ajuste o comportamento deste dispositivo.",
         "title": "Opções XMEye / Sofia"
diff --git a/custom_components/xmeye/translations/ru.json b/custom_components/xmeye/translations/ru.json
index 5ca2458..dd12c4e 100644
--- a/custom_components/xmeye/translations/ru.json
+++ b/custom_components/xmeye/translations/ru.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Задержка сброса детекции движения (0 = мгновенно)",
-          "storage_refresh_interval": "Интервал обновления информации о хранилище (HDD)"
+          "storage_refresh_interval": "Интервал обновления информации о хранилище (HDD)",
+          "transcode_bitrate": "Ограничение битрейта перекодирования H.264",
+          "transcode_h265": "Перекодировать H.265 в H.264 для браузеров без HEVC"
         },
         "description": "Настройка поведения для этого устройства.",
         "title": "Параметры XMEye / Sofia"
diff --git a/custom_components/xmeye/translations/tr.json b/custom_components/xmeye/translations/tr.json
index 2d642e9..13c9b58 100644
--- a/custom_components/xmeye/translations/tr.json
+++ b/custom_components/xmeye/translations/tr.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "Hareket algılama temizleme gecikmesi (0 = anında)",
-          "storage_refresh_interval": "Depolama (HDD) yenileme aralığı"
+          "storage_refresh_interval": "Depolama (HDD) yenileme aralığı",
+          "transcode_bitrate": "H.264 dönüştürme bit hızı üst sınırı",
+          "transcode_h265": "HEVC desteklemeyen tarayıcılar için H.265'i H.264'e dönüştür"
         },
         "description": "Bu cihazın davranışını ayarlayın.",
         "title": "XMEye / Sofia Seçenekleri"
diff --git a/custom_components/xmeye/translations/zh-Hans.json b/custom_components/xmeye/translations/zh-Hans.json
index 447bd30..0f78633 100644
--- a/custom_components/xmeye/translations/zh-Hans.json
+++ b/custom_components/xmeye/translations/zh-Hans.json
@@ -144,7 +144,9 @@
       "init": {
         "data": {
           "motion_clear_delay": "移动侦测清除延迟 (0 = 立即)",
-          "storage_refresh_interval": "存储设备(硬盘)刷新间隔"
+          "storage_refresh_interval": "存储设备(硬盘)刷新间隔",
+          "transcode_bitrate": "H.264 转码码率上限",
+          "transcode_h265": "为不支持 HEVC 的浏览器把 H.265 转码为 H.264"
         },
         "description": "调整此设备的行为。",
         "title": "XMEye / Sofia 选项"
diff --git a/docs/STREAM_INVESTIGATION.md b/docs/STREAM_INVESTIGATION.md
index 2f37da5..209a6b5 100644
--- a/docs/STREAM_INVESTIGATION.md
+++ b/docs/STREAM_INVESTIGATION.md
@@ -2,7 +2,7 @@
 
 **Data:** 2026-06-16
 **Device:** HVR XMEye, 9 canais, host `192.168.16.10` (DVRIP porta 34567, RTSP 554)
-**Status:** Causa raiz identificada e confirmada. Correção pendente (escolha de remediação).
+**Status:** Resolvido nas v0.8.0/v0.8.1; teto de bitrate do transcode na v0.8.2. Ver §8–§10.
 
 ---
 
@@ -285,3 +285,53 @@ await document.querySelector("home-assistant").hass
 ```
 
 Antes: `{frontend_stream_types: ["hls"]}`. Depois: `["hls", "webrtc"]`.
+
+---
+
+## 10. Ajuste (v0.8.2) — o transcode gastava 9× o bitrate da origem
+
+Com tudo funcionando, uma inspeção ao vivo do `/api/streams` (câmera aberta no Chrome)
+mostrou um número ruim. Amostrando `bytes_recv` dos dois producers do `ch0` com 20 s de
+intervalo:
+
+| | |
+|---|---|
+| Origem H.265 do DVR | **0,73 Mbps** @ 2560×1440 |
+| Producer H.264 transcodificado | **6,60 Mbps** @ 2560×1440 |
+
+Resolução obtida decodificando o `sprop-parameter-sets` do SDP do producer transcodificado.
+
+Causa: o template `h264` embutido do go2rtc (`internal/ffmpeg/ffmpeg.go`) é
+
+```
+-c:v libx264 -g 50 -profile:v high -level:v 4.1 -preset:v superfast -tune:v zerolatency -pix_fmt:v yuv420p
+```
+
+— **sem controle de taxa nenhum**. O x264 cai no CRF 23 padrão e gasta bits tentando
+preservar os artefatos de compressão que o próprio DVR já introduziu. Agravante: o consumer
+WebRTC observado estava num IPv6 público, ou seja, 6,6 Mbps saindo pela internet para
+assistir a uma câmera cuja origem cabe em 0,73 Mbps.
+
+O `parseArgs` do go2rtc aceita `#bitrate=`, aplicado **depois** dos args de codec:
+
+```go
+if query["bitrate"] != nil {
+    b := query["bitrate"][0]
+    args.AddCodec("-b:v " + b + " -maxrate " + b + " -bufsize " + b)
+}
+```
+
+Correção: a fonte do ffmpeg passa a ser
+`ffmpeg:<id>#video=h264#audio=opus#bitrate=<N>k`, com `N` configurável por device no fluxo
+de opções (slider, 256–8192 kbit/s, padrão 2048). Junto veio um toggle para desligar o
+transcode por completo — nesse caso não registramos nada no go2rtc e os dois repair issues
+somem, porque a escolha foi deliberada.
+
+Resolução não é alterada de propósito: quem decodifica HEVC continua recebendo os
+2560×1440 originais, e o teto vale só para o caminho do browser.
+
+Nota sobre o `_stream_has_sources`: o sufixo novo não quebra o match. A URL do producer
+conectado é
+`rtsp://127.0.0.1:18554/<id>?video&audio&source=ffmpeg:<id>%23video%3Dh264%23audio%3Dopus…`,
+que depois do `unquote` contém a string da fonte literalmente, sufixo incluído — verificado
+em campo. Trocar a opção muda a string, o match falha de propósito, e o PUT reescreve.