Support for ED060SCS

[archbtww]

Screen from a 8th gen kindle basic

[martinberlin]

Please search for the datasheet. What connector has that one?
6 inches mostly use the 34 pin. Moving this out from Issues and into discussions since it most probably supports this Eink already

[martinberlin]

If not contact me after Christmas I will have some promotion in Tindie and give you a discount code. (Just search for Epdiy)

[ZHANGJINYI1]

i also have this question，could it drive ED060SCS？

[martinberlin]

It should be supported. You just need to check pinout and that the board you fabricate has the right connector

[ZHANGJINYI1]

i count the ED060SCS pins,it seems have 35pins

[martinberlin]

Then you will need to make a Fork of Epdiy-hardware and edit v7 board adding this new connector and it's pin-out

[ZHANGJINYI1]

yes you are right,but i have a problem is that i don't know the definition of ED060SCS pins,i don't have the datasheet of it 原始邮件 发件人：Martin F. ***@***.***> 发件时间：2025年12月24日 20:58 收件人：vroland/epdiy ***@***.***> 抄送：ZHANGJINYI1 ***@***.***>, Comment ***@***.***> 主题：Re: [vroland/epdiy] Support for ED060SCS (Discussion #446) Then you will need to make a Fork of Epdiy-hardware and edit v7 board adding this new connector and it's pin-out — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.

[martinberlin]

I'm sorry then you will need to search hard and get it otherwise you cannot take the mission

[martinberlin]

@ZHANGJINYI1 please check the Epdiy v5 board and just send some to fabrication making sure you have that connector on board.
Anyways I really don't get why many of you are focusing on this old panel instead of using v7 with a high resolution 6" display that is similar price this days.

[ZHANGJINYI1]

thanks a lot,i see,i will try~~

[ZHANGJINYI1]

thanks for your kindly reply.Maybe the 6" display(like SCS,SC4...) so many in China second-hand market,just i guess.anyway,thanks a lot,have a nice day~~ 原始邮件 发件人：Martin F. ***@***.***> 发件时间：2025年12月28日 00:35 收件人：vroland/epdiy ***@***.***> 抄送：ZHANGJINYI1 ***@***.***>, Mention ***@***.***> 主题：Re: [vroland/epdiy] Support for ED060SCS (Discussion #446) @ZHANGJINYI1 please check the Epdiy v5 board and just send some to fabrication making sure you have that connector on board. Anyways I really don't get why many of you are focusing on this old panel instead of using v7 with a high resolution 6" display that is similar price this days. — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.