Add Option CloudGate Probe devices

vendor/index.yaml

@@ -2209,3 +2209,7 @@ vendors:
   - id: safora
     name: Safora Technologies
     website: https://www.safora-tech.com
+
+  - id: option
+    name: Option NV
+    website: https://www.option.com

vendor/option/cloudgate-probe-mbus-codec.yaml

@@ -0,0 +1,85 @@
+uplinkDecoder:
+  fileName: cloudgate-probe-mbus.js
+  examples:
+    - description: Analog input voltage
+      input:
+        fPort: 1
+        bytes: [0, 2, 210, 4]
+      output:
+        data:
+          measurements:
+            - type: analogInput
+              voltage_mV: 1234
+
+    - description: Modbus register value
+      input:
+        fPort: 1
+        bytes: [2, 8, 1, 129, 26, 6, 50, 0, 4, 0]
+      output:
+        data:
+          measurements:
+            - type: modbusValue
+              slaveId: 1
+              registerNumber: 400001
+              rawData: [50, 0, 4, 0]
+
+    - description: Firmware version report
+      input:
+        fPort: 1
+        bytes: [10, 14, 2, 0, 4, 5, 84, 76, 49, 76, 84, 51, 53, 48, 53, 53]
+      output:
+        data:
+          measurements:
+            - type: firmwareVersion
+              firmwareVersion: '2.0.4'
+              hardwareVersion: 5
+              serial: TL1LT35055
+
+downlinkEncoder:
+  fileName: cloudgate-probe-mbus.js
+  examples:
+    - description: Reboot the device
+      input:
+        data:
+          command: reboot
+      output:
+        bytes: [1, 0]
+        fPort: 2
+
+    - description: Set the basic configuration
+      input:
+        data:
+          command: setBasicConfiguration
+          mainInterval: 120
+          debounceTime: 100
+          analogInMode: 1
+          digitalInMode: 2
+          digitalOut1Mode: 0
+          digitalOut2Mode: 0
+          reportOutputPinsState: true
+      output:
+        bytes: [7, 9, 120, 0, 100, 0, 1, 2, 0, 0, 1]
+        fPort: 2
+
+    - description: Write value 1234 to holding register 400020 on Modbus slave 1
+      input:
+        data:
+          command: writeModbusRegister
+          deviceId: 1
+          registerNumber: 400020
+          numRegisters: 1
+          data: [4, 210]
+      output:
+        bytes: [5, 7, 1, 148, 26, 6, 1, 4, 210]
+        fPort: 2
+
+downlinkDecoder:
+  fileName: cloudgate-probe-mbus.js
+  examples:
+    - description: Reboot the device
+      input:
+        fPort: 2
+        bytes: [1, 0]
+      output:
+        data:
+          command: reboot

vendor/option/cloudgate-probe-mbus-profile-eu868.yaml

@@ -0,0 +1,47 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.3'
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0, RP002-1.0.1, RP002-1.0.2, RP002-1.0.3 or RP002-1.0.4
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.3-RevA'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 16
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: true
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+classCTimeout: 60

vendor/option/cloudgate-probe-mbus-profile-us915.yaml

@@ -0,0 +1,47 @@
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: '1.0.3'
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0, RP002-1.0.1, RP002-1.0.2, RP002-1.0.3 or RP002-1.0.4
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: 'RP001-1.0.3-RevA'
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 30
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: true
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+classCTimeout: 60